April 3, 2026
The snow finally melts.
You walk outside.
Is that tiny ceiling spot a one-time thing… or the start of a bigger leak?
And if I ignore it, am I about to buy myself a whole summer of headaches?
A small issue after winter turns into wet insulation, mold, stained drywall, and rotten decking.
Not because they didn’t care.
Because they didn’t look early enough.
Key takeaway: Spring is when hidden winter damage shows itself, and you can still fix it before storms ramp up.
Even in places that don’t feel “extreme,” the roof takes a beating.
Freeze-thaw cycles expand and contract materials.
Wind works shingles loose.
Ice dams and heavy snow loads can force water where it doesn’t belong.
And clogged gutters turn the roof edge into a mini dam.
That lines up with what I see in the field.
The roofs that get checked in early spring usually have smaller, cleaner fixes.
The roofs that wait until the first big spring rain often don’t.
Early spring, once it’s safe to be outside and surfaces are dry.
Before the heavy spring rains and summer storms start testing every weak spot.
Cracked shingles from thermal stress.
Loose flashing at chimneys and vents.
Granules washing into gutters.
Gutter clogs that push water behind fascia.
And on low-slope sections, ponding water that never fully drains.
Just with more penetrations, more rooftop units, and more seams that can fail.
Key takeaway: Inspect early spring, while problems are still small and before storm season starts.
I’m also pro-not-falling.
You can spot a lot without stepping on anything.
Use binoculars if you have them.
Look for shingle edges that look lifted or uneven.
Scan valleys and around chimneys for dark lines or bent metal.
Check for sagging rooflines.
Look for gutters pulling away from the fascia.
Look for piles of granules at downspout exits.
Two-story or higher.
Any roof that still has frost, algae slick, or wet debris.
If you see sagging areas.
If you see damaged flashing and don’t know what “correct” looks like.
If you have a commercial roof with multiple penetrations or rooftop equipment.
Those are not learning-on-the-fly situations.
Roof inspections:
Roof inspection services:
Ladder extends at least 3 feet above the edge.
Maintain three points of contact.
No reaching sideways.
No climbing when it’s windy.
And if you don’t feel 100% sure, don’t do it.
Key takeaway: The best DIY inspection is the one you can do safely from the ground and attic, without gambling on a ladder.
The roof surface and the details around it.
Shingles, seams, flashing, and penetrations.
Cracked shingles.
Curling shingles at edges or corners.
Bald patches where granules are gone.
Nails that popped up and lifted shingles.
Exposed wood or underlayment.
Dark streaks and discoloration that look “new” compared to the rest of the roof.
Any sagging spot that could mean water pooling or deck damage.
One missing shingle can be the only obvious clue.
But water doesn’t need a big hole.
It needs a path.
And seams fail first.
Chimneys
Skylights
Bathroom vents and attic vents
Plumbing vent boots
Any wall-to-roof intersection
Valleys
Corrosion or rust.
Gaps where flashing meets shingles or masonry.
Sealant that’s cracked, missing, or peeling.
Loose counterflashing at chimneys.
Crumbling chimney mortar near the flashing line.
Water can travel along roof materials and framing before appearing indoors. An inspection should assess flashing and nearby roof details rather than assuming the source is directly above a stain.
Moisture shortens roof life.
It also feeds moss and algae.
Pine needles
Small branches and twigs
Seed pods and blossoms that mat up
Moss, lichen, and algae buildup
Roof rake
Leaf blower on a low setting (only if you can do it safely and not blast debris under shingles)
They can strip granules and force water under shingles.
Walking the roof if you’re not experienced.
One bad step can crack shingles or worse.
Key takeaway: Clear debris gently, because aggressive cleaning can create the very leaks you’re trying to prevent.
Behind fascia.
Under shingles at the eaves.
Down siding.
And straight into landscaping and foundations.
Bag it instead of flushing it into downspouts.
Flush gutters with a hose to test flow.
Watch for water backing up or spilling over edges.
Make sure water isn’t running behind the gutter.
Gutters pulling away from fascia.
Loose spikes or fasteners.
Disconnected joints.
Visible rust or corrosion.
Cracks at corners.
If water dumps right at the base of the building, you can get pooling, seepage, and long-term rot issues.
Splash blocks
Repositioning discharge to a better grade line
Key takeaway: Clean gutters and confirm downspouts move water away from the building, because overflow creates leaks and rot fast.
They drop debris.
And they fall.
Dead limbs that could snap in a storm.
Branches hanging over valleys where debris collects.
Trees that constantly shade the roof and keep it damp, which boosts moss and algae growth.
Call an arborist for anything large, high, or close to power lines.
It’s not worth guessing.
Key takeaway: Less shade and less debris means a drier roof, fewer clogs, and fewer surprise punctures.
If water got in this winter, where would it hide first?
Almost always in the attic. Or in the insulation. Or along a rafter where you’ll never see it until it becomes a ceiling stain.
That’s why the smartest part of a spring inspection isn’t always what you see on top. It’s what you see underneath.
If I could only pick one place for homeowners to check after winter, it’s the attic. Because the attic tells the truth. Even when the roof looks “fine.”
Go up during daylight. Turn off the lights. Let your eyes adjust. Then look for:
Then I do the simple touch test. If the wood feels cool and damp, it’s telling you something. If insulation clumps or feels heavy, it’s already been wet long enough to lose performance.
One thing people miss: leaks don’t always drip straight down. Water follows framing. It travels on nails. It can run 6–10 feet before it shows up as a stain. So if you find the stain, look uphill and sideways.
Here’s the tricky part. Not every attic moisture problem is a roof leak. Sometimes it’s warm indoor air hitting a cold roof deck and condensing.
Look for these clues that point to ventilation or humidity issues:
(Warning that moisture control is key to mold prevention.)
Make sure these are clear and working:
Key takeaway: The attic is where winter damage shows up first, and ventilation problems can look exactly like a roof leak until you verify the pattern.
You don’t need fancy tools to catch most roof leaks after winter. You need timing and a checklist.
If you want to get nerdy (in a good way), a cheap moisture meter can help confirm what your hand is already telling you. And if a stain is questionable, a thermal camera can sometimes reveal colder, damp areas. Pros use these tools because they cut guesswork. Not because the basics don’t work.
Key takeaway: Leaks announce themselves with stains, smells, and moisture patterns, and the sooner you treat it as active, the less damage it can do.
This is where homeowners get surprised. Because the leak wasn’t loud. It was consistent.
In the attic, use a flashlight and a gentle probe. A screwdriver should not sink into wood with light pressure. If it does, the wood is compromised. That’s no longer “monitor it.” That’s “fix it.”
A small ceiling stain may conceal a larger moisture problem. Have persistent staining and suspected decking damage assessed rather than assuming an unchanged stain means the leak has stopped.
Key takeaway: A leak doesn’t have to be dramatic to be destructive, and soft decking is a red-flag that needs fast action.
If you’re wondering where to look first, don’t overthink it. Look at the details. That’s where water gets leverage.
If you manage a commercial property, multiply this by ten. More penetrations. More seams. More rooftop equipment. More opportunities for a small failure to become a big interior problem.
Key takeaway: Most winter leaks come from flashing, edges, penetrations, and drainage, not from “random holes” in the field of shingles.
I love giving people control over their maintenance. I also don’t want you “saving money” by creating a hospital bill or turning a small issue into a bigger repair.
What a good professional inspection should give you: Clear photos. Clear locations. Clear priorities. And a plan that prevents problems, not just patches symptoms.
Key takeaway: DIY is great for spotting and maintaining, but anything structural, high-risk, or detail-heavy is where pros earn their keep.
The goal isn’t a perfect roof forever. The goal is fewer surprises.
Take photos of anything suspicious before and after repairs. Save notes on dates of inspections and storm events. Keep professional inspection summaries in one folder. Track “repeat areas” like chimneys, skylights, and valleys.
This matters more than people think. Especially if you ever need to explain the timeline of damage or maintenance. Good records reduce confusion. And confusion is expensive in time, stress, and missed opportunities.
Key takeaway: The best roof leak repair is the one you never need, because you handled the weak points in spring and stayed consistent all year.
Different regions punish roofs differently. But the themes stay the same.
Even short cold snaps can create expansion and contraction cycles. That’s when small cracks widen. That’s when fasteners loosen. That’s when flashing details get tested.
Spring storms and windy rain will find the weakest seam. If you inspect early spring, you’re not guessing. You’re preparing.
High humidity and shade encourage moss, algae, and lichen. And buildup holds moisture against the roof surface longer than it should. That accelerates wear and makes inspections harder because damage hides under growth.
Key takeaway: Weather swings open gaps, storms exploit them, and humidity keeps roofs wet longer, so your spring inspection priorities should match your climate patterns.
If your gut says, “Something isn’t right,” listen to it. Document what you see. Check the attic. Clear the drainage paths. And don’t wait for the next heavy rain to confirm your suspicion.
4505 Marion St SE Albany, OR
info@orezonabc.com
Because the best time to find a leak is when it’s still trying to hide.
GAF — Spring Roofing Maintenance Tasks You Can Complete Yourself:
Owens Corning — Essential Roof Maintenance Tips and Guidelines:
For help assessing winter damage, see our residential roof inspections and roof repair services. Contact Orezona to discuss your property.
